High chromium alloy (Cr12MoV) is used, with chromium content ≥ 12%, to ensure the strength of the wear-resistant matrix; after high temperature forging at 1200 ℃ and water quenching heat treatment, the surface hardness of the tooth tip is HRC62-65, and the hardness of the tooth root is HRC45-50 (both toughness);The casting precision grade reaches CT8, the surface roughness Ra is less than or equal to 1.6 μm, and the material adhesion during operation is reduced.
The length range of the conventional model is 80-350mm, the tooth tip thickness is 15-40mm, and the mounting hole diameter is 12-50mm (suitable for pins of different models); the head diameter of the rock tooth is increased by 20% compared with the common model, and the cutting edge angle of the earthwork tooth is designed to be 30 ° (reducing the penetration resistance); the weight range is 0.5-8kg, which meets the adaptation requirements of excavators of 1-50 tons.
11
Jul
11
Jul
11
Jul
11
Jul
Our fleet of Caterpillar excavators used to check the bucket teeth every 20 days while digging for concrete debris. Since replacing your rock-specific teeth, we've cut our monthly parts budget by more than half by replacing them every 45 days. What really impressed us was the durability last month: an operator accidentally hit a steel beam, but the teeth didn't crack. Definitely worth the investment.
Municipal work means switching between clay, gravel and asphalt, and our old teeth are either clogged with dirt or crumbling on hard surfaces. Your universal teeth are a game changer-the clay slides down right away and they hold up well on the asphalt. They fit our Volvo EC210 like a glove and even our new crew can replace them in 5 minutes. Productivity has increased by 20%.
In the humid environment of the Amazon Basin, standard teeth rust and wear out within 3 weeks. Your teeth are 6 weeks old and still sharp and show no signs of decay. They are a perfect match for our Komatsu PC360.We have ordered more than 50 units for other members of the fleet, saving 15 hours of maintenance downtime per month.
We operate 8 different excavator brands, so stocking replacement teeth used to be a logistical nightmare. Your cross-compatible design fits every model from Kobelco to Hitachi -- now we only keep one type in stock instead of 8.Testing on port concrete rubble has shown a 30% reduction in wear compared to OEM parts. Our engineers were very pleased with the performance.
EN
