Digger Rubber Tracks for 1-30T Excavators | Wear-Resistant & All-Terrain

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
Digger rubber tracks :Wear-resistant Adaptable Spot Quick

Digger rubber tracks :Wear-resistant Adaptable Spot Quick

Our digger rubber tracks is made of high elastic wear-resistant rubber and multi-layer steel wire skeleton, which is tear resistant and strong in load-bearing. It has stable grip in muddy, gravel, grassland and other complex terrains, and can reduce the rolling damage to the ground while reducing skidding. It is especially suitable for municipal, garden and other scenes that need to protect the ground.The products are suitable for 1-30 tons of mainstream excavators, covering Komatsu, Carter, Sany, Kubota and other brands, and are easy to install without modification.Each track is rigorously tested for durability under high-intensity operations, extending replacement cycles and reducing maintenance costs.Support spot quick delivery and model customization, and enjoy quality assurance after sale, so that the excavator can walk more stably and operate more efficiently.
Get A Quote

Advantages of Digger Rubber Tracks

Super wear-resistant material, service life increased by 50%

Our digger rubber tracks is made of imported high elastic and wear-resistant rubber, added with special anti-aging formula, and matched with multi-layer high-strength steel wire skeleton and nylon cord layer, the tear strength is 30% higher than that of ordinary track.Continuous operation in harsh environments such as gravel ground and concrete pavement can significantly slow down the wear rate, and the service life under normal use can reach more than 3000 hours, which is 50% longer than that of similar products, and greatly reduces the replacement frequency and cost.

All-terrain adaptation, stable grip without damaging the ground

The track surface is designed with anti-skid patterns, which can increase the grip by 25% in muddy, wet grass or steep slopes, reduce skidding and ensure the smooth running of the excavator;At the same time, the buffer characteristics of rubber material can reduce the pressure on the ground, which can effectively avoid ground cracking or lawn rolling damage when working on municipal roads, garden scenic spots and indoor sites, taking into account both operational efficiency and environmental protection.

Full model coverage, installation without changing the body

The product is suitable for almost all mainstream excavator models from 1-30 tons, including Komatsu, Carter, Sany, Kubota, Yanmar and other brands, with corresponding sizes from mini excavators to medium-sized engineering machines.The track joint is designed with a precise buckle, so there is no need to cut or change the body structure during installation, and ordinary maintenance personnel can complete the replacement within half an hour, which saves time and effort, and avoids the idle equipment caused by complex installation.

Quick delivery in stock and warranty service, worry-free after sale

The three major storage centers in the country are equipped with popular models of digger rubber tracks, which can be delivered within 24 hours after the order is placed, and can also be delivered within 48 hours in remote areas; all tracks are provided with a 12-month warranty, and if there are problems such as cracking and degumming caused by non-human factors, new ones will be reissued free of charge.

Rubber Track for Skid Steer Loaders

With its unique performance advantages, digger rubber tracks is widely used in many scenarios and becomes an ideal choice in different fields of operation.

In the field of municipal engineering, digger rubber tracks can play an important role in urban road maintenance, underground pipeline laying and sidewalk reconstruction.It can effectively reduce the rolling damage to the hardened pavement, avoid cracks or damage to the pavement after construction, reduce the cost of later repair, and at the same time, when working in narrow streets and residential areas, it has stable walking and low noise, and reduces the impact on the lives of surrounding residents.

FAQ

What brands and models of excavators are suitable for your digger rubber tracks?

Our rubber tracks cover 1-30 tons of mainstream excavator brands, including Komatsu, Caterpillar, Sany, Kubota, Yanmar, Volvo, etc. Whether imported or domestic brands, as long as specific models (such as Kubota KX165, Sany SY215, etc.) are provided, the corresponding track size can be accurately matched.If you are not sure about the model, you can provide the tonnage or track pitch, width and other parameters of the excavator, and the customer service will assist in confirming the appropriate model.
Our digger rubber tracks have a service life of 3000-5000 hours under normal operating conditions (depending on the operating environment), and longer life in mild wear scenarios such as grass and concrete.Compared with the steel crawler, it has the following advantages: it has little damage to the ground, and is suitable for municipal, garden and other scenes that need to protect the ground; it has low walking noise, and reduces the interference to the surrounding environment; it is lighter, and can reduce the fuel consumption of the equipment; and it has better anti-skid performance, and is not easy to slip in muddy terrain.
Installation does not require complex professional tools, our digger rubber tracks uses snap-in connector design, with installation instructions, ordinary maintenance personnel or experienced operators can complete the replacement within half an hour.
Three points shall be paid attention to in daily maintenance: firstly, avoid driving at high speed for a long time on the sharp gravel ground to prevent the track from being cut; secondly, clean the soil and weeds on the track in time after operation to avoid long-term accumulation of impurities and wear of rubber; thirdly, avoid direct sunlight and oil pollution during storage, store it in a dry and ventilated place, and cover it with dust cloth if necessary.Following these methods can effectively prolong the service life of the track.

Our Company

How to Choose the Right Undercarriage Parts for Excavators and Dozers

11

Jul

How to Choose the Right Undercarriage Parts for Excavators and Dozers

View More
OEM vs Aftermarket Undercarriage Parts for Excavators and Dozers: Which Is Better?

11

Jul

OEM vs Aftermarket Undercarriage Parts for Excavators and Dozers: Which Is Better?

View More
Common Causes of Undercarriage Wear in Excavators and Dozers—and How to Prevent Them

11

Jul

Common Causes of Undercarriage Wear in Excavators and Dozers—and How to Prevent Them

View More
Top 10 Signs Your Track Chain or Sprocket Needs Replacement

11

Jul

Top 10 Signs Your Track Chain or Sprocket Needs Replacement

View More

What Our Clients Are Saying

Tom
Tom

When we were working on urban roads, we had very high requirements for ground protection. The previous steel tracks always caused cracks in the pavement and faced a lot of fines.After changing the digger rubber tracks of this hotel, the problem was completely solved-working on asphalt roads and sidewalks did not damage the ground at all, and the grip on wet lawns was very stable, and the noise was much less than before.After 10 months of use, the wear of the track is much lower than expected, and the team's three excavators have been replaced with the same model.

Yamada
Yamada

My small excavator mainly digs ditches and carries fertilizer in the orchard. The previous iron track always crushed the root system of fruit trees, and the soil was compacted and difficult to recover.This rubber track is designed for orchards. It is soft and tough. It does not damage seedlings when it travels between fruit trees. The soil structure is also well protected.The mud in rainy days has not slipped, and the pattern is still very clear after almost a year of use, which is much more cost-effective than the imported track I bought before.

Anna
Anna

The landscape projects we undertake often need to work in villas and parks, and the customers' requirements for the protection of lawns and flagstones are almost harsh.This digger rubber tracks is suitable for our Volvo mini-excavator. When installing, the workers said that the buckle design was very convenient, and it was installed in half an hour.In the actual operation, there is almost no indentation on the lawn, and the customer is particularly satisfied with the acceptance.

Carlos
Carlos

The terrain on the construction site is very complicated, sometimes it is a pile of gravel, sometimes it is a newly poured cement floor, and the previous tracks either grind fast in the gravel or leave scratches on the cement floor.After changing to this rubber track, it can cope with both scenarios-the gravel floor is very durable, and the cement floor will not leave traces.What surprised me most was the after-sales service. There was a small problem with one of the tracks before.

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
Why Choose Us

Why Choose Us

Our digger rubber tracks uses imported high elastic rubber raw materials, add special wear-resistant formula, with multi-layer high-strength steel wire and nylon skeleton layer, tear resistance is 40% higher than ordinary rubber track.Continuous operation in harsh environments such as gravel and cement floor can significantly slow down the wear rate, and the service life under normal use can reach more than 3000 hours, which can reduce the downtime loss caused by frequent replacement and reduce the long-term use cost.
WhatsApp WhatsApp E-mail E-mail YouTube YouTube FaceBook FaceBook Linkedin Linkedin
email goToTop