Bosh sahifa > Mahsulotlar > Yer Bilan Ishlash Uchun Asboblar > Bit Kesuvchilar
ESHISH TUGUNLARI/HALQALAR
Payvandlashda oldindan yoki keyin isitish shart emas, ishlatish juda oson. 60 mm dan 150 mm gacha bo'lgan diametrlarda mavjud.
Dome&Flat Shaped Round: Adaptator tishlari, lopatlar, kotlar, og'ir yer ko'chirish uskunalari kabi yer bilan aloqada bo'ladigan ilovalar uchun a'lo haldir.
CHOCKY WEAR BAR
Chocky sterjenlarining standart qalinligi 23 mm, standart uzunligi 240 mm,
kengligi 25 mm dan 150 mm gacha bo'lishi mumkin. Sizning maxsus so'rovingizga qarab ham ishlab chiqarishimiz mumkin.
1. Material:
ASTM A532 15/3 CrMo oq temir, oddiy po'lat asos
2. Kimyoviy tarkib
| C | Cr | Mn | Mo | Cu | P | Si | S |
| 2.5-3.5 | 15-18 | 0.5-1.0 | 0.5-2.5 | 0.5-1.0 | 0.02max | 0.5-1.0 | 0.02max |
3. Mexanik xususiyat
1) Cho'zilish chidamliligi: 630 Mpa Min.
2) Kesish chidamliligi: 250 Mpa Min.
3) Qattiqlik: 63HRC Min.
4. Eylangan tugma
| Boʻlimning raqami | O'lcham(mm) | O'lchamlar (mm) | B.R.(kg) | |||
| A | B | C | D | |||
| WB 60 | ø60x27 | 60 | 27 | 17 | 10 | 0.7 |
| WB 75 | ø75x27 | 75 | 27 | 17 | 10 | 0.9 |
| WB 90 | ø90x27 | 90 | 27 | 17 | 10 | 1.2 |
| WB 110 | ø110x32 | 110 | 32 | 20 | 12 | 2.1 |
| WB 115 | ø115x32 | 115 | 32 | 20 | 12 | 2.5 |
| WB 150 | ø150x41 | 150 | 41 | 25 | 16 | 5.7 |
5. Chocky Wear Tugun
| Boʻlimning raqami | O'lcham(mm) | O'lchov (mm) | B.R.(kg) | ||||
| A | B | C | D | E | |||
| CB 25 | 240x25x23 | 240 | 25 | 15 | 8 | 23 | 0.9 |
| CB 40 | 240x40x23 | 240 | 40 | 15 | 8 | 23 | 1.5 |
| CB 50 | 240x50x23 | 240 | 50 | 15 | 8 | 23 | 1.9 |
| CB 65 | 240x65x23 | 240 | 65 | 15 | 8 | 23 | 2.5 |
| CB 80 | 240x80x23 | 240 | 80 | 15 | 8 | 23 | 3.2 |
| CB 90 | 240x90x23 | 240 | 90 | 15 | 8 | 23 | 3.5 |
| CB 100 | 240x100x23 | 240 | 100 | 15 | 8 | 23 | 3.9 |
| CB 130 | 240x130x23 | 240 | 130 | 15 | 8 | 23 | 5.2 |
| CB 150 | 240x150x23 | 240 | 150 | 15 | 8 | 23 | 7.3 |
6. Chocky Wear Tayoqchasi va Wear Tugmachasi Qo'llanilishi
EN
