גלגלי מסילה לדガー מיניאטורי - חלפים כבדים ל-Kubota, Yanmar

Mini Digger Track Rollers - Heavy-Duty Replacement for Kubota, Yanmar

Mini Digger Track Rollers - Heavy-Duty Mini Excavator Rollers

Maintain the mobility of your mini excavator with our high-quality track rollers - designed for durability in confined space and harsh conditions.

Get A Quote

Advantage of mini digger track rollers

Forged Steel Construction for Maximum Durability

Manufactured from heat treated alloy steel (HRC 50-55) to resist deformation and last 2X longer than standard rollers - even in rocky and abrasive conditions.

Double-Sealed Bearings to Keep Contamination Out

Keep dirt, mud, and dust out with triple-lip seals and grease purged chambers to extend bearing life an additional 300+ hours of operation

Laser Aligned to be Precision Balanced and Operate Without Vibration

Double-checks were completed at assembly to prevent uneven wear on sprockets and chains from the mini excavator causing unplanned maintenance costs

Direct OEM Replacement Sizing

Exact bolt-on mini excavator replacement for Kubota, Yanmar, Takeuchi and leading brands of mini excavators 1.5T-8T Mini Excavator

1.Urban Construction Manoeuvrability in tight job sites Utilize on paved surfaces without damaging infrastructure

2. Landscaping Projects Access and manoeuver over lawns and gardens Ensure ground damage is mitigated with proper weight distribution.

3. Utility Work Dealing with trenches and pipe installation Reliably operate in muddy conditions

4. Rental Fleets Extend min excavator life between rentals Decrease turnaround time created by downtime

FAQ

What do track rollers do on the mini digger?

Track rollers hold the weight of the machine and guide the track chain through a smooth path which decreases wear on the undercarriage.

How often do you replace your mini digger track rollers?

Replace once you start to see wobbling, or leaking or obvious wear - typically, you replace track rollers around every 1500 - 2000 hours of use.

Can I just replace one track roller or do I need to change them all?

For proper performance and wear, we always recommend replacing rollers in pairs or in a full set depending on the condition of the rollers. You also help to maintain a more balanced wear on the track.

Are track rollers interchangeable through the mini digger brands?

No, each roller is specific to a model, so you always want to check you excavator model and size before ordering.

Our Company

Jul

Bauma Munich 2025 Highlights – Grateful for Your Visit!

bauma is more than the world’s leading trade fair for construction, building material and mining machines, construction vehicles and construction equipment: it is the heartbeat of the industry and international success engine, innovation driver and marketplace.

Jul

CTT Expo 2025 – Thank You for Visiting Booth 8-841!

International Trade Fair for Construction Equipment and Technologies

Jul

Valuable Insights and Deeper Connections at bauma CHINA 2024

What Our Clients Are Saying

Tom

"My Takeuchi TB216 was throwing tracks every other week. I put these rollers on 8 months ago, and I haven't had an alignment issue since day one. I no longer had to make annoying adjustments!"

Lisa

"I run these on our fleet of Kubota U17s. I replaced the old rollers after about 900 hours of use. These ones now have 1,800 hours and are still kicking! Worth the upgrade."

David

"I replaced all 5 rollers on my Yanmar VIO35 in one evening. A little challenging at first but perfect fit with only basic tools. The improvement in operation from my worn vacuum set is massive."

John

"These rollers can perform at -20°C, they never froze like the old ones in severe cold. Two winter seasons of extremely harsh conditions and ZERO problems. Just great, dependable performance when we need it most."

Get a Free Quote

Our representative will contact you soon.

Name

Company Name

Message

0/1000

Why Choose Us

We have been producing and selling unsurpassed excavator spare parts, bulldozer spare parts, motor graders spare parts, and heavy machine spare parts since 1998. We are located in Quanzhou—China's Construction Machinery Capital. Our factory is 35,000 sq. ft. , and our company is led by grass-roots and skilled manufacturing expertise. We are always continuing to improve and modernize our processes and equipment because we know that quality parts equals parts that keep your equipment moving!